Тема: Хорошая утилита для AACD RAID Adaptec
Понадобился менеджер просмотра состояния RAID.
Установлен Adaptec 2420SA
После не долгих поисков, попалась утилитка arcconf ...
# cd /usr/ports/sysutils/arcconf
# make install clean
=> asm_freebsd_x64_v7_30_18837.tgz doesn't seem to exist in /usr/ports/distfiles/.
=> Attempting to fetch http://download.adaptec.com/raid/storage_manager/asm_freebsd_x64_v7_30_18837.tgz
asm_freebsd_x64_v7_30_18837.tgz 100% of 96 MB 3882 kBps 00m00s
===> Extracting for arcconf-v7.30.18837
=> SHA256 Checksum OK for asm_freebsd_x64_v7_30_18837.tgz.
===> Patching for arcconf-v7.30.18837
===> Configuring for arcconf-v7.30.18837
===> Installing for arcconf-v7.30.18837
===> Generating temporary packing list
===> Checking if sysutils/arcconf already installed
install -s -o root -g wheel -m 555 /usr/ports/sysutils/arcconf/work/freebsd7/cmdline/arcconf /usr/local/sbin
install -o root -g wheel -m 555 /usr/ports/sysutils/arcconf/work/410.status-aac-raid /usr/local/etc/periodic/daily
===> Registering installation for arcconf-v7.30.18837
===> Cleaning for arcconf-v7.30.18837
# rehash
# arcconf getconfig 1
Controllers found: 1
----------------------------------------------------------------------
Controller information
----------------------------------------------------------------------
Controller Status : Optimal
Channel description : SATA
Controller Model : Adaptec 2420SA
Controller Serial Number : CB7BAF
Physical Slot : 5
Installed memory : 128 MB
Copyback : Disabled
Background consistency check : Disabled
Automatic Failover : Enabled
Stayawake period : Disabled
Spinup limit internal drives : 0
Spinup limit external drives : 0
Defunct disk drive count : 0
Logical devices/Failed/Degraded : 1/0/0
--------------------------------------------------------
Controller Version Information
--------------------------------------------------------
BIOS : 5.2-0 (15611)
Firmware : 5.2-0 (15611)
Driver : 2.1-9 (1)
Boot Flash : 5.2-0 (15611)
--------------------------------------------------------
Controller Battery Information
--------------------------------------------------------
Status : Not Installed
----------------------------------------------------------------------
Logical device information
----------------------------------------------------------------------
Logical device number 0
Logical device name : AR1
RAID level : 1
Status of logical device : Optimal
Size : 476160 MB
Read-cache mode : Enabled
Write-cache mode : Disabled (write-through)
Write-cache setting : Enabled (write-back)
Partitioned : Yes
Protected by Hot-Spare : No
Bootable : Yes
Failed stripes : No
Power settings : Disabled
--------------------------------------------------------
Logical device segment information
--------------------------------------------------------
Segment 0 : Present (Controller:1,Channel:0,Device:0) WD-WMAYP2596886
Segment 1 : Present (Controller:1,Channel:0,Device:1) ????????
----------------------------------------------------------------------
Physical Device information
----------------------------------------------------------------------
Channel #0:
Transfer Speed : SATA 3.0 Gb/s
Device #0
Device is a Hard drive
State : Online
Supported : Yes
Transfer Speed : SATA 3.0 Gb/s
Reported Channel,Device(T:L) : 0,0(0:0)
Vendor : WDC WD50
Model : 03ABYX-01WERA1
Firmware : 01.0
Serial number : WD-WMAYP2596886
Size : 476940 MB
Write Cache : Enabled (write-back)
FRU : None
S.M.A.R.T. : No
S.M.A.R.T. warnings : 0
NCQ status : Disabled
Device #1
Device is a Hard drive
State : Hot Spare
Dedicated Spare for : logical device 0
Supported : Yes
Transfer Speed : SATA 3.0 Gb/s
Reported Channel,Device(T:L) : 0,1(1:0)
Vendor : WDC WD50
Model : 03ABYX-01WERA0
Firmware : 01.0
Serial number : ????????
Size : 476940 MB
Write Cache : Enabled (write-back)
FRU : None
S.M.A.R.T. : No
S.M.A.R.T. warnings : 0
NCQ status : Disabled
Command completed successfully.
#Полагаю проблема исчерпана. Красивый вывод, все понятно и четко.
Мне пригодилась!