Тема: Не стартует mysql56-server

Доброго времени суток. Установил FreeBSD10.2+mysql56-server. Ниже конфиг /usr/local/etc/my.cnf

# Example MySQL config file for large systems.
#
# This is for a large system with memory = 512M where the system runs mainly
# MySQL.
#
# You can copy this file to
# /etc/my.cnf to set global options,
# mysql-data-dir/my.cnf to set server-specific options (in this
# installation this directory is /var/db/mysql) or
# ~/.my.cnf to set user-specific options.
#
# In this file, you can use all long options that a program supports.
# If you want to know which options a program supports, run the program
# with the "--help" option.

# The following options will be passed to all MySQL clients
[client]
#password       = your_password
port            = 3306
socket          = /tmp/mysql.sock

# Here follows entries for some specific programs

# The MySQL server
[mysqld]
log-error=/var/log/mysql.log
bind-address=127.0.0.1
port            = 3306
socket          = /tmp/mysql.sock
skip-locking
key_buffer = 256M
max_allowed_packet = 1M
table_cache = 256
sort_buffer_size = 1M
read_buffer_size = 1M
read_rnd_buffer_size = 4M
myisam_sort_buffer_size = 64M
thread_cache_size = 8
query_cache_size= 16M
# Try number of CPU's*2 for thread_concurrency
thread_concurrency = 8

# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
#
#skip-networking

# Disable Federated by default
skip-federated

# Replication Master Server (default)
# binary logging is required for replication
###log-bin=mysql-bin

# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id       = 4

# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
#    the syntax is:
#
#    CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
#    MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
#    where you replace <host>, <user>, <password> by quoted strings and
#    <port> by the master's port number (3306 by default).
#
#    Example:
#
#    CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
#    MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
#    start replication for the first time (even unsuccessfully, for example
#    if you mistyped the password in master-password and the slave fails to
#    connect), the slave will create a master.info file, and any later
#    change in this file to the variables' values below will be ignored and
#    overridden by the content of the master.info file, unless you shutdown
#    the slave server, delete master.info and restart the slaver server.
#    For that reason, you may want to leave the lines below untouched
#    (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id       = 2
#
# The replication master for this slave - required
#master-host     =   <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user     =   <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password =   <password>
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port     =  <port>
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin

# Point the following paths to different dedicated disks
#tmpdir         = /tmp/
#log-update     = /path-to-dedicated-directory/hostname

# Uncomment the following if you are using BDB tables
#bdb_cache_size = 64M
#bdb_max_lock = 100000

# Uncomment the following if you are using InnoDB tables
#innodb_data_home_dir = /var/db/mysql/
#innodb_data_file_path = ibdata1:10M:autoextend
#innodb_log_group_home_dir = /var/db/mysql/
#innodb_log_arch_dir = /var/db/mysql/
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high
#innodb_buffer_pool_size = 256M
#innodb_additional_mem_pool_size = 20M
# Set .._log_file_size to 25 % of buffer pool size
#innodb_log_file_size = 64M
#innodb_log_buffer_size = 8M
#innodb_flush_log_at_trx_commit = 1
#innodb_lock_wait_timeout = 50

[mysqldump]
quick
max_allowed_packet = 16M

[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates

[isamchk]
key_buffer = 128M
sort_buffer_size = 128M
read_buffer = 2M
write_buffer = 2M

[myisamchk]
key_buffer = 128M
sort_buffer_size = 128M
read_buffer = 2M
write_buffer = 2M

[mysqlhotcopy]
interactive-timeout

Стартую /usr/local/etc/rc.d/mysql-server start
Смотрю в /var/log/mysql.log а там

150121 14:57:49 mysqld_safe Starting mysqld daemon with databases from /var/db/mysql
2015-01-21 14:57:49 0 [ERROR] /usr/local/libexec/mysqld: ambiguous option '--log=/var/log/mysql.log' (log-bin, log_slave_updates)
2015-01-21 14:57:49 0 [ERROR] Aborting
2015-01-21 14:57:49 0 [Note] Binlog end
150121 14:57:49 mysqld_safe mysqld from pid file /var/db/mysql/lom.pid ended

эти параметры log-bin, log_slave_updates, если я правильно понимаю настраиваются при настройка кластера для репликации, но я кластер не настраиваю, у меня один сервер. log-bin убирал не помогает. В общем как поправить, заранее спасибо.

Поковырял форумы и выяснил, что возможно в скрипте /usr/local/etc/rc.d/mysql-server указан параметр log вот его содержание

#!/bin/sh
#
# $FreeBSD: tags/RELEASE_10_2_0/databases/mysql56-server/files/mysql-server.in 340872 2014-01-24 00:14:07Z mat $
#

# PROVIDE: mysql
# REQUIRE: LOGIN
# KEYWORD: shutdown

#
# Add the following line to /etc/rc.conf to enable mysql:
# mysql_enable (bool):  Set to "NO" by default.
#                       Set it to "YES" to enable MySQL.
# mysql_limits (bool):  Set to "NO" by default.
#                       Set it to yes to run `limits -e -U mysql`
#                       just before mysql starts.
# mysql_dbdir (str):    Default to "/var/db/mysql"
#                       Base database directory.
# mysql_optfile (str):  Server-specific option file.
#                       Default to "${mysql_dbdir}/my.cnf".
# mysql_pidfile (str):  Custum PID file path and name.
#                       Default to "${mysql_dbdir}/${hostname}.pid".
# mysql_args (str):     Custom additional arguments to be passed
#                       to mysqld_safe (default empty).
#

. /etc/rc.subr

name="mysql"
rcvar=mysql_enable

load_rc_config $name

: ${mysql_enable="NO"}
: ${mysql_limits="NO"}
: ${mysql_dbdir="/var/db/mysql"}
: ${mysql_optfile="${mysql_dbdir}/my.cnf"}

mysql_user="mysql"
mysql_limits_args="-e -U ${mysql_user}"
: ${hostname:=`/bin/hostname`}
pidfile=${mysql_pidfile:-"${mysql_dbdir}/${hostname}.pid"}
command="/usr/sbin/daemon"
command_args="-c -f /usr/local/bin/mysqld_safe --defaults-extra-file=${mysql_optfile} --user=${mysql_user} --datadir=${mysql_dbdir} --pid-file=${pidfile} ${mysql_args}"
procname="/usr/local/libexec/mysqld"
start_precmd="${name}_prestart"
start_postcmd="${name}_poststart"
mysql_install_db="/usr/local/bin/mysql_install_db"
mysql_install_db_args="--basedir=/usr/local --defaults-extra-file=${mysql_optfile} --datadir=${mysql_dbdir} --force"

mysql_create_auth_tables()
{
        eval $mysql_install_db $mysql_install_db_args >/dev/null 2>/dev/null
        [ $? -eq 0 ] && chown -R ${mysql_user}:${mysql_user} ${mysql_dbdir}
}

mysql_prestart()
{
        if [ ! -d "${mysql_dbdir}/mysql/." ]; then
                mysql_create_auth_tables || return 1
        fi
        if checkyesno mysql_limits; then
                eval `/usr/bin/limits ${mysql_limits_args}` 2>/dev/null
        else
                return 0
        fi
}

mysql_poststart()
{
        local timeout=15
        while [ ! -f "${pidfile}" -a ${timeout} -gt 0 ]; do
                timeout=$(( timeout - 1 ))
                sleep 1
        done
        return 0
}

run_rc_command "$1"

вроде параметр log нигде не проскакивает. Так в чем может быть проблема?

2

Re: Не стартует mysql56-server

не мешало бы

: ${mysql_enable="NO"}

заменить на

: ${mysql_enable="YES"}

если в rc.conf не добавляли этого.

Добавлено: 07-09-2015 21:48:33

ну и можете раскомментировать log-bin

3

Re: Не стартует mysql56-server

в rc.conf прописано mysql_enable="YES". Или формат поменялся?

4

Re: Не стартует mysql56-server

формат не поменялся